Can somebody look the markings of the windscreen?

[maxpain80]

Hi!

Im looking to import -91 minicab to here (europe/Finland) and im gointo to register that to a car. So i need to know are there any markings in the windows?

If there are some markings can somebody take a picture of those ?

PS. By the way this is great forum!

[greg0187]

You should be more careful on what you are asking. There is no VIN# visible through the windshield if that is what you are asking.

See this thread. http://www.minitrucktalk.com/showthread.php?t=188

[speedy67]

I think he's asking if there are any Safety standard markings on the windows / windshield. He's not asking for any advice or schemes to register the vehicle illegally. He is from Europe, and their Governments are not afraid of small, practical, fuel efficient vehicles.

I don't recall seeing any markings on my trucks, but I'll have a look tomorrow and reply here.

[Colin]

Like an AS1 line, or what...?

[Dan]

This is the marking on my 1994 mitsubishi u15d

[maxpain80]

I think he's asking if there are any Safety standard markings on the windows / windshield. He's not asking for any advice or schemes to register the vehicle illegally. He is from Europe, and their Governments are not afraid of small, practical, fuel efficient vehicles.

I don't recall seeing any markings on my trucks, but I'll have a look tomorrow and reply here.

Yeah you are right. I need to know does windscreens have AS1, AS2, AS3, E / dot markings, if not i cannot register. Sorry that i didnt tell that good what im looking for.

AS1 / laminated markings are ok for front windscreen, but side winscreens need to be AS2. can someone look those :rolleyes:

[myhijet]

This is from the passenger (left) side of a 97 Hijet.
196
The front window has AS2 DOT-20 on it but is hard to get on the picture.

[maxpain80]

Thanks for answering.

Can some one look does 91-> mitsu minicab have (e) markings in rear break lights and turn signal lights.

[glenn]

hey guys,

as1, as2, as3 refers to the thickness of the lamination between the glass, as1 aka .030 lami glass is used for windshields that are going on the road, as2 and as3 are used for the off road vehicles or heavy equipment vehicles that are used in construction such as front end loaders. side glass on vehicles for the road can be either as2 lami glass aka .015 lami or tempered glass. tempered glass has a proper stamp on it.
btw... some old british cars used tempered glass on the windshield, when it broke.... it shattered into little pieces, not the greatest when it is bad weather outside like rain or snow!!!

Glenn

[maxpain80]

up!

Need to know... i have bid account ready and loaded :D

[Dan]

I'm not sure what an (e) marking is. All of these minis come with the standard "road worthy" motor vehical equipment. horn, wipers, signals, brakes, hazzard, high/low lamps, seat belts, mirrors...

[maxpain80]

Its just a (E) character stamped somewhere in lamp housing.

[werase643]

bottom corner


MMC
LAMISAFE
ASAHI
M334ASI
DOT-20


this is for a U14T LHD 2WD 3 speed