PDA

View Full Version : Mitsubishi plugs


TetsuKuma
11-01-2007, 08:54 PM
For those of you with Mitsubishi trucks, 1993-95 models (maybe post 95 but not sure).
Stock NGK BKR5E 11

Crosses to Denso IK16 (Iridium plug) or...
any plug that is 14mm, 3/4" (20mm) reach,
5/8" hex, gasket seat.
michael a
11-02-2007, 06:23 PM
Have you replaced the plug wires and if you did what kind did you use? michael
TetsuKuma
11-02-2007, 11:58 PM
No, my plug wires are in fine shape. The engine runs so much nicer with the new plugs I don't feel the need to mess with it anymore!
Shoot1000
11-03-2007, 02:50 PM
Check out an Isuzu dealer or other Japanese dealers. You can probably do a crossover on wires.
abcminitrucks
11-06-2007, 07:22 PM
Check out an Isuzu dealer or other Japanese dealers. You can probably do a crossover on wires.

Yea, and pay thru the nose!!!
SMURF
11-15-2007, 06:00 PM
Would someone be able to tell me if the ignition system in a suzuki 660 is electronic or straight coil & points. A friend was told that his ignition wires were toast and he wants to know what to replace them with. I said any spark plug wire will do if it's straight coil and points ignition. I'm sure he'll want genuine Suzuki parts but a NAPA Part # will do.
Thanks for this
David