Wheel alignment numbers?

[Coast Steve]

Hi Guys,

I think our van needs a front wheel alignment.

It looks to me the toe out is to much, does anyone have this info for a 91 U42V Bravo van?


Thanks again, Steve

[slimbad]

Steve,

Don't no the exact specs for your van. Here are some toe-in specs for some of the other kei-trucks:

Mitsubishi....2-7mm

Daihatsu.....1.5-4.8mm

Suzuki........2-4mm

Subaru.......1-3mm

If you set yours at 2.5-3mm that "should" get you in the ballpark.

Here's a couple of threads on this subj that may be helpful:

http://www.minitrucktalk.com/showthread.php?t=2311

http://www.minitrucktalk.com/showthread.php?t=3092

As for the caster/camber specs, I could get them however for the Mits, Daihatsu and Suzuki (and possibly the rest) they're not adjustable...........later, slim

[Coast Steve]

Thanks Slim!

Will do,


Steve

[Coast Steve]

So I had the van wheels alignment done today and it was just like I thought, It was WAY out!

What a difference !

, they said it had a toe out about 7/33" now it's toe in about 1/16"
Drives way better now too.

They used a brand new system to check it and it looked impresive about $30,000 impresive.


$85 well spent.


Steve

[slimbad]

Steve,

Glad to hear you're straightened "IN", now when you get your Jeggs 10-250's on you should be good to go............later, slim