Post What Rim/Tire Combo Fits Here

[zbadboy]

I will start the thread. Please post Rim/Tire size and off set for stock, 2" lift, 3" lift etc... Please be honest with your results. I.E. no rubbing with routine driving or turning. Any body want to change this format or if one of the moderators wants to turn this into a sticky.....go ahead and get sticky withit:)

Jeff

[Acerguy]

Let's see how it goes. We can change the format at a later date if needed. :)

[TetsuKuma]

OK...
Truck - Mitsubishi 1993
Lift - None
Rim - UFS six spoke
Off set - not known
Tire - Firestone Winterforce 175/70R13
Spacers or wheel adapters - s.s. metric washer on each stud (spacer)
Rubbing issues - None

[okeitrucker]

Truck - 1991 Suzuki
Lift - None
Rim - stock factory wheels
Off set - stock
Tire - Carlisle Tru Power (tractor tire) 6-12, 4-ply, 590 pounds each at 28 psi
Rubbing issues - None
Traction - Excellent! Better than expected!

[okeitrucker]

Truck - 1993 Suzuki
Lift - None
Rim - ITP Aluminum C-Series Type 4
Off set - 5+2
Tire - 23x8x12 Carlisle All Trails
Rubbing issues - Both front tires rub on the front of the wheel well/fender when turning either direction. A little massage with a hammer alleviates most of the rubbing. Lifting the truck even an inch would probably take care of the rest. Back tires are no problem. Wheels do not rub at all, just the front tires.

[slimbad]

Happy Keitruckers New Year!

Truck - 94 mits
Lift - None
Rims - stock 6x12"
Off set - stock
Tires - Dunlop AT's Front 25x8x12, Rear 25x10x12
Rubbing issues - slight rub on right front during hard right turn (tapped out front of inner fender solved this). I would recommend a 1-2" front lift for this setup, no issues with back tires. Tires were new OEM from brothers 750 Kawa Brute Force 4x4 ATV (were not radical enough for him).
Ride - smooth, moderate tire roar on flat road surface, traction off-road excellent. I run 20 psi front and 18 psi rear.....slim