Japanese Mini Truck Forum http://www.minitrucktalk.com/ Japanese mini 4x4 truck forum for the mini truck enthusiasts. en Fri, 18 May 2012 06:15:42 GMT vBulletin 60 http://www.minitrucktalk.com/images/misc/rss.png Japanese Mini Truck Forum http://www.minitrucktalk.com/ Seafoam smoke show http://www.minitrucktalk.com/showthread.php?14042-Seafoam-smoke-show&goto=newpost Fri, 18 May 2012 05:35:40 GMT These things must get good mileage. In an attempt to unstick my choke (once warm, it floods and is hard to start) I did the sea foam thing. But the... These things must get good mileage. In an attempt to unstick my choke (once warm, it floods and is hard to start) I did the sea foam thing. But the weather's so damn miserable, once it stalled I went inside and left it until morning.
So I fire it up to go to work.... whole block gets smoked out! Somewhat embarrassed I head to work trailing a huge plume of white smoke.... almost a mile until it stopped.
And the choke's still stuck. ]]> Mitsubishi Minicab BC_MMC http://www.minitrucktalk.com/showthread.php?14042-Seafoam-smoke-show Subaru sumo http://www.minitrucktalk.com/showthread.php?14041-Subaru-sumo&goto=newpost Thu, 17 May 2012 20:24:23 GMT Hi all just got my first van a 1992 Subaru sumo 1.2. Am looking for some spare for it in the uk but can't find a thing. I'm in Edinburgh and haven't seen another one on the road for year. I am now going read all the information I can on the wee van before I ask anymore questions.
Thanks Liam. ]]> Introductions Sumopower http://www.minitrucktalk.com/showthread.php?14041-Subaru-sumo Newbie here: Need advice and help http://www.minitrucktalk.com/showthread.php?14040-Newbie-here-Need-advice-and-help&goto=newpost Thu, 17 May 2012 14:18:22 GMT I am new here. I am looking for help with trying to figure out several things about these mini trucks. First just to see if I am wasting my time and... I am new here. I am looking for help with trying to figure out several things about these mini trucks. First just to see if I am wasting my time and so I'm not wasting everyone else's time. Are these legal in the state of Missouri (anyone know)? I want to get one to drive on the road on a daily basis. And don't you have to have a title to do that? Seems most of them don't have or come with titles. Also, I have read several places that if it is 25 years or older that the current laws don't effect them directly. This true? Thanks in advance for any help everyone. Aj. ]]> General Truck Info aj86 http://www.minitrucktalk.com/showthread.php?14040-Newbie-here-Need-advice-and-help Run on http://www.minitrucktalk.com/showthread.php?14039-Run-on&goto=newpost Thu, 17 May 2012 14:02:40 GMT I've noticed that the engine in my 1990 wants to run on after I turn off the ignition. Never goes for more than 3 seconds and doesn't happen all the time, but I do notice it more when the engine has been running for 30 mins or more.

I'm considering a timing issue
idle issue
low octane in the gas (what octane are you guys running 87, 89, 91?)

I guess the simplest solution would be to try a higher octane and see if that fixes the issue.

what do you guys think? ]]> Subaru Sambar Jessf http://www.minitrucktalk.com/showthread.php?14039-Run-on SUBARU SUMO carb problem **please help** http://www.minitrucktalk.com/showthread.php?14038-SUBARU-SUMO-carb-problem-**please-help**&goto=newpost Thu, 17 May 2012 11:27:51 GMT Hi everyone, I am hoping someone may be able to offer some help on a carb issue I am having. I have a 1991 1.0ltr subaru sumo (uk model) EF10 2WD 5... Hi everyone, I am hoping someone may be able to offer some help on a carb issue I am having. I have a 1991 1.0ltr subaru sumo (uk model) EF10 2WD 5 speed, manual choke, which developed (im guessing) a gearbox issue. I had the van loaded (moving house) on the motorway when it started to vibrate quite dramatically (particularly the gear lever. When I dipped the clutch it would settle down, but as soon as I engaged the gears it would vibrate. At slow speed it was ok, but after 25-30mph it would start to vibrate again (so I guessed clutch or gearbox). When I took the gearbox off I couldn’t see anything really wrong with it (I didn’t open it up, but there was no play with the gearbox, clutch seemed fine and the flywheel didn’t show any signs of wear / warping). I had a spare engine I bought off ebay (the guy said it was rebuilt a couple of thousand miles ago and then sat for 1-2 years). The oil looked good and the crank moved freely and it looked like a very clean engine. So I swapped the engines over, fired it up and it idled and revved fine. I timed it up and it was running fine, responsive and sounded great.

I thought it would be a good idear to flush the water through the engine as it had been sat without any water running through it for at least 2 years. Unfortunately I snapped the bolt in the inlet manifold for the thermostat housing. As I had a spare manifold from the engine I just removed I swapped them over (to save drilling out the snapped stud). Fired the engine up and 100metres down the road the carb started playing up. Now it will not idle without the choke pulled halfway out and half throttle. If I go full throttle it cuts out (too rich I think). I cleaned the carb out .. still the same. I swapped the carb for the one off the other engine… still the same. I thought maybe the inlet manifold was leaking air, so I took it off and re attached with fresh gaskets and paste,.. still the same. I have played with the mixture / idle / tried without the airfilter attached and it still will not idle without choke and throttle and cuts out whenever you try to rev it up.

I thought maybe the solenoid was causing an issue. So I removed the solenoid valve and covered the hole. Now it would start and idle without the choke, but touch the throttle and it will cut out. As it was idling I tried spraying a mist of wd40 around the carb / manifold to see if it was sucking in air anywhere, but nothing… I don’t know what to try next! Any suggestions would be greatly appreciated
Thanks, Paul ]]> Microvans paulhills http://www.minitrucktalk.com/showthread.php?14038-SUBARU-SUMO-carb-problem-**please-help** Sambar Van over the Coquihalla http://www.minitrucktalk.com/showthread.php?14037-Sambar-Van-over-the-Coquihalla&goto=newpost Thu, 17 May 2012 07:43:09 GMT Hi i was wondering has any one taken a Sambar not super charged over the Coquihalla? More importantly the snowshed part. How did it go an did it... Hi i was wondering has any one taken a Sambar not super charged over the Coquihalla? More importantly the snowshed part. How did it go an did it actually make it up and over? ]]> Subaru Sambar Yuuto http://www.minitrucktalk.com/showthread.php?14037-Sambar-Van-over-the-Coquihalla the first book to be published in english concering all things mini truck http://www.minitrucktalk.com/showthread.php?14036-the-first-book-to-be-published-in-english-concering-all-things-mini-truck&goto=newpost Thu, 17 May 2012 07:32:15 GMT The title of the book is an illistrated guide to the japanese mini truck and introduction to all things kei truck

if you'd like a copy and i know you will some of your photos will be inside, i promise
go to trafford publishing, amazon, or barnes and noble for your copy start looking for it by june 29th 2012

over 160 full color photos incl history, use, specs, comparisons, purchasing, dealer inquiries, electrification, and even amphibious concepts

wish more of you would have added your stories as i asked and had no reply

i know my book will boost all of your endeavors
sincerely mark roehrig author ]]> General Truck Info wheelsea http://www.minitrucktalk.com/showthread.php?14036-the-first-book-to-be-published-in-english-concering-all-things-mini-truck cross over part numbers http://www.minitrucktalk.com/showthread.php?14035-cross-over-part-numbers&goto=newpost Wed, 16 May 2012 02:31:53 GMT i have a 2000 carry, i just paid 115.00 for a rear axcel bearing form a parts supplier on this site. Once the part got sent to me i took part to a... i have a 2000 carry, i just paid 115.00 for a rear axcel bearing form a parts supplier on this site. Once the part got sent to me i took part to a local shop,crossed the part # over, couild have got the same bearing for less than 6.00. icant believe this kind of gouging is going on. Be careful, i hope this is not a common practice ]]> Suzuki Carry greg208 http://www.minitrucktalk.com/showthread.php?14035-cross-over-part-numbers Differential Lock http://www.minitrucktalk.com/showthread.php?14034-Differential-Lock&goto=newpost Tue, 15 May 2012 05:55:12 GMT Hi all, I have a 1994 Suzuki carry with diff lock and am in need of some parts info. Today while servicing the truck, I noticed the housing for the... Hi all, I have a 1994 Suzuki carry with diff lock and am in need of some parts info. Today while servicing the truck, I noticed the housing for the differential lock actuator on the rear axle housing had broke in half (the housing for the diaphragm broke away from the housing with the shifting fork). I cant find anywhere to buy a new one and was hoping someone here could point me in the right direction. Thanks in advance for any kind of advice. ]]> Suzuki Carry joker09 http://www.minitrucktalk.com/showthread.php?14034-Differential-Lock What to look for when buying a suzuki carry ? http://www.minitrucktalk.com/showthread.php?14033-What-to-look-for-when-buying-a-suzuki-carry&goto=newpost Tue, 15 May 2012 05:37:42 GMT Did some searching on the web and came across here and wow you guys have built quite the little gathering of info on these trucks , Im going to look... Did some searching on the web and came across here and wow you guys have built quite the little gathering of info on these trucks , Im going to look at a 89 carry 4x4 tomorrow and wanted to know if there were any problem areas or things specifically I should look for besides the obvious ? I have quite a bit of mechanical experience so what you tell me wont be jibberish , truck has 38,000km on it and from what I have found searching people recomend you tune it up and do the waterpump and timing belt and fluids ..

Thanks to anyone who takes the time to add something and look forward to getting my hands on this thing

CHEERS ]]> Suzuki Carry jumbo2 http://www.minitrucktalk.com/showthread.php?14033-What-to-look-for-when-buying-a-suzuki-carry Installed power windows and power locks http://www.minitrucktalk.com/showthread.php?14032-Installed-power-windows-and-power-locks&goto=newpost Mon, 14 May 2012 20:15:20 GMT I fianlly got around to installing the power windows and locks. I bought it all at A1electric. Power windows were tough to install, but overall it... I fianlly got around to installing the power windows and locks. I bought it all at A1electric. Power windows were
tough to install, but overall it went well. I did the drivers side first, passenger side was a little easier. I had to
cut some of the metal form the door for it to fit flush to allow door panel to snap back on. After strugling with how to wire it up,
I ended up buying 2 fuse blocks from O'Rielys and installing them in the glove box. This made it much easier. The one on left
is connected to battery and includes a ground. The one on right is ignition 12 volt acc. Doing this made wiring much easier and
allowed me to have all my fuses in one location. I plan to make a cover that fits over fuse blocks so I can still use the glove box for other stuff.
I also purchased A1electric's MES door actuator with keyless entry. The kit is pretty straight foward and not difficult,
just takes some time to install. After install I did have to go back an adjust the postion of the actuator.

Lastly I had ordered a rearview mirror with compass and temp from ebay. It was easy,
just a 12v acc wire, a ground, and 2 wires that run temp sensor. Hardest part was fishing wire through A arm.
I installed sensor under front bumper so it could get some air and stay away from engine heat (hopefully) so far so good.

Heres some pics!
Attached Images
]]> General Truck Info davecaris http://www.minitrucktalk.com/showthread.php?14032-Installed-power-windows-and-power-locks 1999 Mitsubishi mini cab for sale http://www.minitrucktalk.com/showthread.php?14031-1999-Mitsubishi-mini-cab-for-sale&goto=newpost Mon, 14 May 2012 19:19:01 GMT 41,485 kilometers, new off road 8 ply tires, new custom wheels, new custom front and rear bumpers, bedliner, como kit , 4500 lb winch, new battery,... 41,485 kilometers, new off road 8 ply tires, new custom wheels, new custom front and rear bumpers, bedliner, como kit , 4500 lb winch, new battery, new spot lights, 4x4, 5 spd manual. Good running truck. $6,500.00 located in Cleburne Texas.Click image for larger version.  Name: Prep for camo and bedliner 023.JPG  Views: 15  Size: 186.3 KB  ID: 10180Click image for larger version.  Name: Prep for camo and bedliner 024.JPG  Views: 17  Size: 186.3 KB  ID: 10181Click image for larger version.  Name: Prep for camo and bedliner 025.JPG  Views: 14  Size: 167.8 KB  ID: 10182Click image for larger version.  Name: Prep for camo and bedliner 026.JPG  Views: 17  Size: 200.3 KB  ID: 10183Click image for larger version.  Name: Prep for camo and bedliner 027.JPG  Views: 16  Size: 178.9 KB  ID: 10184
Attached Thumbnails
Click image for larger version.  Name: Prep for camo and bedliner 023.JPG  Views: N/A  Size: 186.3 KB  ID: 10180   Click image for larger version.  Name: Prep for camo and bedliner 024.JPG  Views: N/A  Size: 186.3 KB  ID: 10181   Click image for larger version.  Name: Prep for camo and bedliner 025.JPG  Views: N/A  Size: 167.8 KB  ID: 10182   Click image for larger version.  Name: Prep for camo and bedliner 026.JPG  Views: N/A  Size: 200.3 KB  ID: 10183   Click image for larger version.  Name: Prep for camo and bedliner 027.JPG  Views: N/A  Size: 178.9 KB  ID: 10184  

]]> Mini Truck Sales crotonoil http://www.minitrucktalk.com/showthread.php?14031-1999-Mitsubishi-mini-cab-for-sale Questions about removing and rebuilding the Mitsubishi 3g83 http://www.minitrucktalk.com/showthread.php?14030-Questions-about-removing-and-rebuilding-the-Mitsubishi-3g83&goto=newpost Mon, 14 May 2012 13:17:40 GMT I was doing some tinkering on my sick 1997 Mitsubishi mini cab. I'm pretty sure it needs rings because it smokes bad. Head gasket is likely blown because there is oil in the coolant and the coolant smells like exhaust. Anyway, I need to remove the engine for inspection and rebuilding.

Best I can tell, the engine should be removed from the bottom. Is this correct? Also, Is the 3G83 engine a very complex engines (as far as rebuilding is concerned)? The rebuild kits are between $700-800 dollars, and I've been quoted $800 on a good used engine.

Once I get the motor out, are there certain "problem areas" that I should be aware of on these engines? Mine is a SOHC 2-valve engine carbureted.

Basically, any advice you can offer on any of the above procedures is greatly appreciated. I don't mind spending the money, but I definitely wanna get it right. ]]> Mitsubishi Minicab fslay http://www.minitrucktalk.com/showthread.php?14030-Questions-about-removing-and-rebuilding-the-Mitsubishi-3g83 time for a new look http://www.minitrucktalk.com/showthread.php?14029-time-for-a-new-look&goto=newpost Mon, 14 May 2012 05:49:00 GMT '93 Sambar old look and new look
Attached Images
]]> Mini Truck Spottings Gotrek http://www.minitrucktalk.com/showthread.php?14029-time-for-a-new-look need alittle help http://www.minitrucktalk.com/showthread.php?14028-need-alittle-help&goto=newpost Mon, 14 May 2012 02:38:34 GMT i just got a 89 mitsubishi mits it has no spark can anyone help or point me in the right direction i do have power at the coil but not sure is its... i just got a 89 mitsubishi mits it has no spark can anyone help or point me in the right direction i do have power at the coil but not sure is its wired right...there is also a igniter unit #md167709 is the a way to test or where to get parts any help would be great thanks ]]> Mitsubishi Minicab towdady http://www.minitrucktalk.com/showthread.php?14028-need-alittle-help Carb. Kits for DD51T Suzuki http://www.minitrucktalk.com/showthread.php?14027-Carb-Kits-for-DD51T-Suzuki&goto=newpost Mon, 14 May 2012 01:56:18 GMT FYI---I was just fishing around on ebay and under the search function "Suzuki Mini Truck" I saw carb. kits for 32.50 from ebay member "siriusconincnosparts".
I would highly recommend that anybody that orders one to contact them and make sure its the right kit. ]]> General Truck Info TRAX and HORNS http://www.minitrucktalk.com/showthread.php?14027-Carb-Kits-for-DD51T-Suzuki 2001 Hijet Starter Needed http://www.minitrucktalk.com/showthread.php?14026-2001-Hijet-Starter-Needed&goto=newpost Sun, 13 May 2012 23:38:37 GMT I have a 2001 Hijet 4x4 Model S210p that the starter is going out.. I checked eBay but not seeing that specific starter. Any suggestion on the best... I have a 2001 Hijet 4x4 Model S210p that the starter is going out.. I checked eBay but not seeing that specific starter. Any suggestion on the best place to buy online?? Prefer here in USA... ]]> Daihatsu Hi jet tacobender http://www.minitrucktalk.com/showthread.php?14026-2001-Hijet-Starter-Needed What have I done ? http://www.minitrucktalk.com/showthread.php?14025-What-have-I-done&goto=newpost Sun, 13 May 2012 22:58:57 GMT Hello everyone. I'm sure glad I found all of you guys on here.
I just acquired a 1995 ? suzuki. I was told to look at the seat belt tag for the year & thats what I found.
The thing does not have any Suzuki emblims on it & the center of the steering wheel says autozam.
I found a tag on the drivers right: inside by the back of the seat & it says Suzuki motor corp.
chassis;; v-dk51t
eng. F6A 657 cc

the thing has axel lock, dump box, black line plow on the front, rear blade & a salt spreader.
it's a little rough but seems to run pretty good althoe kind of sloppy suspension & steering.

Any body able to tell me what it is? also it's cameo so may be covering up some things
Attached Images
]]> Introductions brii http://www.minitrucktalk.com/showthread.php?14025-What-have-I-done NW Ohio, previous Suzuki owner, looking for another!! http://www.minitrucktalk.com/showthread.php?14024-NW-Ohio-previous-Suzuki-owner-looking-for-another!!&goto=newpost Sun, 13 May 2012 02:55:14 GMT Had to re-register, been so long, I forgot my username, but was here a few years ago. Had 2 different Carrys, now looking to get back into a mini.... Had to re-register, been so long, I forgot my username, but was here a few years ago. Had 2 different Carrys, now looking to get back into a mini. Anything available fairly close, please email me merc4@mediacombb.net Damn things used to be EVERYWHERE, now I rarely see any. :D

BTW, is Michtrucks still on this forum? He actually bought my first Carry, a 96 I think? Sweet little truck, never should of sold it! :frustration: ]]> Introductions donohio http://www.minitrucktalk.com/showthread.php?14024-NW-Ohio-previous-Suzuki-owner-looking-for-another!! 1990 Carry DB51T 4WD Shift Controller http://www.minitrucktalk.com/showthread.php?14022-1990-Carry-DB51T-4WD-Shift-Controller&goto=newpost Thu, 10 May 2012 18:57:10 GMT I have been having problems with the diff lock on the Carry. It seems to want to just switch on (diff lock light comes on and will not switch off)... I have been having problems with the diff lock on the Carry. It seems to want to just switch on (diff lock light comes on and will not switch off) when driving and makes a hell of a bang if this happens at speed. I found the controller (part #38885-85021) and removed it (for anyone that wants to know it is under the dash right behind the glove box).
What I want to know is can I safely run the truck with this controller removed? At least until I can find a replacement. It was scarey running the truck when this diff lock just engaged on its own, sounded really bad and like something was going to blow up. I'm thinking I can safely run in 2WD and probably even 4WD just won't have a diff lock? Is this a correct assumption? And finally does anyone know where I can get a replacement controller? I have heard they can be very expensive?
Thanks, Phil ]]> Suzuki Carry pdavies http://www.minitrucktalk.com/showthread.php?14022-1990-Carry-DB51T-4WD-Shift-Controller tok tok http://www.minitrucktalk.com/showthread.php?14021-tok-tok&goto=newpost Thu, 10 May 2012 14:44:02 GMT iam having a toktoktok sound coming from my front end right side especially when passing unpaved roads, i am wondering what it is? inputs greatly... iam having a toktoktok sound coming from my front end right side especially when passing unpaved roads, i am wondering what it is?
inputs greatly appreciated.

thanks.
mini ]]> General Truck Info axle http://www.minitrucktalk.com/showthread.php?14021-tok-tok Cushman white truck lift help http://www.minitrucktalk.com/showthread.php?14020-Cushman-white-truck-lift-help&goto=newpost Thu, 10 May 2012 02:36:31 GMT Hello all. I have a 1997 white truck by CMC. The rims on these trucks are 13 inch. I tried to put a polaris ranger 12 inch rim on but the rim... Hello all.

I have a 1997 white truck by CMC. The rims on these trucks are 13 inch. I tried to put a polaris ranger 12 inch rim on but the rim would not clear the front brake caliper. So because of this I bought 14 inch ATP rims with tires used. The tires are 26 inch. With all this means I need a big lift in order to clear the front wheel well.

I made 4 inch spacers to fit on top of the strut. I also made 3 inch spacers for the underside of the suspension in areas like the cross member, tie rod, and strut rod. I only made 3 inch because I had 2x3 metal lying around. I didnt think an inch would make a difference.

After putting all this on and lowering it to the ground it had bad camber (tires on ground sitting in and out on top, not sure if thats neg or pos) and the wheels toed in. Even with this lift the tires hit the front of the fender.

In order to correct the camber I am thinking of cutting the control arm and making it longer. Also to correct the toe-ing in of the wheels I am thinking of cutting the tie rods and making them longer.

What do you think? Am I just making this more complictated? Can I change out the front brake caliper to a smaller one and fit a 12" rim on it?

Thanks for your help

Eric ]]> General Truck Info bigtoejones http://www.minitrucktalk.com/showthread.php?14020-Cushman-white-truck-lift-help utility box http://www.minitrucktalk.com/showthread.php?14019-utility-box&goto=newpost Wed, 09 May 2012 00:59:13 GMT i have a daihatsu hijet and it has utility boxs and id like normal side and if someone is looking for boxs id like to trade or something. i have a daihatsu hijet and it has utility boxs and id like normal side and if someone is looking for boxs id like to trade or something. ]]> General Truck Info chaseoe http://www.minitrucktalk.com/showthread.php?14019-utility-box Spotted in Fargo ND http://www.minitrucktalk.com/showthread.php?14018-Spotted-in-Fargo-ND&goto=newpost Tue, 08 May 2012 04:13:24 GMT Spotted one on Main Ave in Fargo heading west today. Didn't see the brand but it looked like the guy inside was wearing a suit. Maybe a well dressing member of ours? :D I remember somebody saying they were legal in West Fargo, any news for Fargo?

Sorry no pics I was driving. ]]> Mini Truck Spottings Daner http://www.minitrucktalk.com/showthread.php?14018-Spotted-in-Fargo-ND Hijet workshop manual http://www.minitrucktalk.com/showthread.php?14017-Hijet-workshop-manual&goto=newpost Tue, 08 May 2012 02:01:34 GMT Hi! This is a common request, but does anyone know where I can get my hands on a workshop manual for 1989 Hijet van 993. I am down in Tasmania, not... Hi!
This is a common request, but does anyone know where I can get my hands on a workshop manual for 1989 Hijet van 993.
I am down in Tasmania, not many Hijets here. Thanks! ]]> Daihatsu Hi jet Kavekom http://www.minitrucktalk.com/showthread.php?14017-Hijet-workshop-manual Am I having a problem with my alternator, flaky battery cables or something else? http://www.minitrucktalk.com/showthread.php?14016-Am-I-having-a-problem-with-my-alternator-flaky-battery-cables-or-something-else&goto=newpost Mon, 07 May 2012 18:01:25 GMT I drove to work this morning and about halfway there noticed that the truck had less power than usual. I stepped on the accelerator and nothing... I drove to work this morning and about halfway there noticed that the truck had less power than usual. I stepped on the accelerator and nothing happened. I made a stop on the way to pick up some breakfast and listened to the truck for a couple minutes. I found that when idling, the truck sounded fine, but when I would press the accelerator, engine rpms would slow and almost stall the engine, before increasing rpms and sounding almost normal. However, I found that when I turned the headlights off, this behavior went away. I know that the battery cables look pretty frayed and appear to have been repaired a few times so I plan to replace them, but I'm not confident that new cables will solve the issue. ]]> General Truck Info charlesshoults http://www.minitrucktalk.com/showthread.php?14016-Am-I-having-a-problem-with-my-alternator-flaky-battery-cables-or-something-else Honda Acty drop sides and tailgate,never used for sale. http://www.minitrucktalk.com/showthread.php?14015-Honda-Acty-drop-sides-and-tailgate-never-used-for-sale&goto=newpost Mon, 07 May 2012 15:26:21 GMT Hi guys,probably a bit cheeky but i have both drop sides and a tailgate for a c reg Honda Acty. These came with a romahome i bought,the sides have... Hi guys,probably a bit cheeky but i have both drop sides and a tailgate for a c reg Honda Acty.
These came with a romahome i bought,the sides have never been used,they even have the paper protectors on the catch hooks.
There is no rust at all on them,they are in white(not sure of the code)with the origional honda sticker still in place.
I am about to put them on E-bay but thought it a good idea to post here,i can imagine these are either expensive or hard to replace..
They have been dry stored inside the camper until i bought it,then stored at my work,this brings me to the bad points..
There is one small dent about as big as my finger end,and a few spots of overspray where some clown didn't cover them up(i'm sure this will polish off,but there are a few chips in the paint from when they were stacked in the camper..
If anyone is interested in making me an offer just e-mail me...If you would like them painting to match your pickup this can also be arrange be arranged.. Thanks for taking the time to read this....cheers Daz. ]]> Honda Acty Daz williams http://www.minitrucktalk.com/showthread.php?14015-Honda-Acty-drop-sides-and-tailgate-never-used-for-sale <![CDATA['93 Carry front bumper]]> http://www.minitrucktalk.com/showthread.php?14014-93-Carry-front-bumper&goto=newpost Mon, 07 May 2012 00:46:09 GMT After searching out my options, I found one very nice bumper that was way out of my price range, and a couple cheap ugly looking brush guards and... After searching out my options, I found one very nice bumper that was way out of my price range, and a couple cheap ugly looking brush guards and front receiver hitch mounts. My main reasons for wanting a front bumper are to protect the radiator when dropping the front wheels in ditches, and to have a good solid place to mount a winch later if I decide I need one. Not liking the options I had, I went the other way and made my own. ;) My dad and I attacked it this weekend and got it done in two days. I wanted it up high enough so that it didn't hand down and take away clearance, and won't get caught up when crossing ditches/ruts. This is where it's at now, the only thing left is a skid plate to protect the bottom of the radiator and give it something smooth to slide on should it drag, and not get caught up like it did on the last outing. I almost pulled the plastic off when backing out of a ditch after it nosed into the other side!

b1.jpg

b2.jpg

b3.jpg
Attached Images
]]> Suzuki Carry keithluneau http://www.minitrucktalk.com/showthread.php?14014-93-Carry-front-bumper parts needed honda tn7 http://www.minitrucktalk.com/showthread.php?14013-parts-needed-honda-tn7&goto=newpost Sun, 06 May 2012 21:25:15 GMT hi all i know befor anyone says its not a acty i know i need some parts for me honda tn7 360cc 1977 bottom arms and most off the front... hi all
i know befor anyone says its not a acty i know
i need some parts for me honda tn7 360cc 1977
bottom arms and most off the front suspension
ware do i go and get theses parts from any help will do just want little truck on the road
message me with numbers and addresss so i can order them
cheers
jonathan ]]> Honda Acty meerkat http://www.minitrucktalk.com/showthread.php?14013-parts-needed-honda-tn7 Carry 660 CV Removal questions http://www.minitrucktalk.com/showthread.php?14012-Carry-660-CV-Removal-questions&goto=newpost Sun, 06 May 2012 16:16:42 GMT Hi all, Hope someone can help. We have a little Carry 660 4wd with a tipper, we put a lift kit and some nobbly tire on, she goes anywhere! we... Hi all,

Hope someone can help. We have a little Carry 660 4wd with a tipper, we put a lift kit and some nobbly tire on, she goes anywhere! we love her!

I have been trying to remove the LH cv - the joint is gone and needs replacing. I have removed the tie rod hub side, the lower stabilzer bar at chassis end. What is the best course of action to remove the axle from the hub end? There are 4 small screws in the hub that look like they need to come out but I cannot shift them, extremely tight and I am worried about rounding them out.

Will I need a spring compression tool to remove the hub assembly from the strut?

Any help is greatly appreciated.

Matt ]]> Suzuki Carry Matt1981 http://www.minitrucktalk.com/showthread.php?14012-Carry-660-CV-Removal-questions My Hijet/Midget runs without fuel!!! With Pics! http://www.minitrucktalk.com/showthread.php?14011-My-Hijet-Midget-runs-without-fuel!!!-With-Pics!&goto=newpost Sun, 06 May 2012 03:01:20 GMT Ok guys. Trying to solve a weird mystery. I had the carb rebuilt for my Daihatsu Midget what has the same motor as the Hijet. I put it all... Ok guys. Trying to solve a weird mystery.

I had the carb rebuilt for my Daihatsu Midget what has the same motor as the Hijet.

I put it all back together the same way it came apart. I took good photos before so I could make sure all the lines went where they were supposed to.

Because the truck was sitting so long, I wanted to prime the fuel pump and make sure the fuel was getting to the carb, so I pulled the fuel line that went from the fuel pump to the carb. The other 2 fuel lines (fuel tank intake and return line) I left hooked up.

I put the carb fuel line into a bottle so when the fuel made it that far, it would go in the bottle instead of making a mess.

That's when things started getting weird.

Fuel started coming into the bottle (the line that feeds the carb) as it was supposed to, so I was going to quit cranking the starter....but then all of a sudden it started sputtering and begins to idle!!!!

It ran for about 5 seconds, and then died.

I hooked the fuel line back to the carb and expected it to start running, but it would start anymore. Not even sputter.

What the heck is going on. How is the truck running when the fuel line to the carb is disconnected?!?!?:frustration: and why won't it run now?

Keep in mind this was a FRESH rebuilt carb with NO fuel in it.

Am I missing something? Is there another line that goes into the carb that delivers fuel that I don't know about?

HELP!!!

]]> Daihatsu Hi jet unclejemima http://www.minitrucktalk.com/showthread.php?14011-My-Hijet-Midget-runs-without-fuel!!!-With-Pics! vancouver service garage recommendations? http://www.minitrucktalk.com/showthread.php?14009-vancouver-service-garage-recommendations&goto=newpost Sat, 05 May 2012 20:35:35 GMT hello,

i have a 1991 suzuki every van (automatic) that won't cut out of high idle. does anyone know of a competent garage in vancouver to service these trucks?

thank you,

brian

bjcarroll@cci.eu.com ]]> General Truck Info brian_vancouver http://www.minitrucktalk.com/showthread.php?14009-vancouver-service-garage-recommendations i have a 1987 minicab LHD 2wd 3 speed with a 3g81 engine and need help http://www.minitrucktalk.com/showthread.php?14008-i-have-a-1987-minicab-LHD-2wd-3-speed-with-a-3g81-engine-and-need-help&goto=newpost Sat, 05 May 2012 19:00:59 GMT the governor stops me from going over 35mph i do not know how to remove any ideas or suggestion? i believe it has a computer box but am not... the governor stops me from going over 35mph i do not know how to remove any ideas or suggestion? i believe it has a computer box but am not positive.:frustration: ]]> Mitsubishi Minicab king ramsey xi http://www.minitrucktalk.com/showthread.php?14008-i-have-a-1987-minicab-LHD-2wd-3-speed-with-a-3g81-engine-and-need-help Sambar Headlight Replacement http://www.minitrucktalk.com/showthread.php?14007-Sambar-Headlight-Replacement&goto=newpost Fri, 04 May 2012 21:27:01 GMT Here's a quick guide I wrote up on how to replace the headlights on a '90-ish Sambar (Round Sealed Beam bulbs).

I used the Sylvania H6024XV bulbs. The XV means that instead of a 320 hour life you get an 850 hour life and 15% brighter (which still isn't all that bright). I found them at Canadian Tire for ~$18 each.

I was looking into HID projector H6024 bulbs but it was getting to be a bit of a pain to get exactly what I wanted. I might still go that way, but in the mean time I needed a new bulb...
Attached Files
]]> Subaru Sambar SpikeFiend http://www.minitrucktalk.com/showthread.php?14007-Sambar-Headlight-Replacement Need head gasket and manual for a Mit. VX http://www.minitrucktalk.com/showthread.php?14006-Need-head-gasket-and-manual-for-a-Mit-VX&goto=newpost Fri, 04 May 2012 20:49:17 GMT Have a friend with the Mit. VX. It has the 3 cylinder engine and needs a head gasket. He also need a shop manual. HELLLLLPP!!!! :0 Have a friend with the Mit. VX. It has the 3 cylinder engine and needs a head gasket. He also need a shop manual. HELLLLLPP!!!! :0
Attached Images
]]> Mitsubishi Minicab MartinD http://www.minitrucktalk.com/showthread.php?14006-Need-head-gasket-and-manual-for-a-Mit-VX Sambar Coil and ECU http://www.minitrucktalk.com/showthread.php?14005-Sambar-Coil-and-ECU&goto=newpost Fri, 04 May 2012 19:33:28 GMT I have a set of brand new coils for a sambar and a new ECM as well. They are for a 99 sambar I believe its a TT2 may work with other years as well. I have a set of brand new coils for a sambar and a new ECM as well. They are for a 99 sambar I believe its a TT2 may work with other years as well. ]]> Parts Sales XtremeMini http://www.minitrucktalk.com/showthread.php?14005-Sambar-Coil-and-ECU Outer cv joint replacement http://www.minitrucktalk.com/showthread.php?14004-Outer-cv-joint-replacement&goto=newpost Fri, 04 May 2012 03:26:56 GMT We had a truck come in the shop that had a knock knock knock sound coming from front end. Driving the truck and looking down through the passenger... We had a truck come in the shop that had a knock knock knock sound coming from front end. Driving the truck and looking down through the passenger seat you could see the drivers side front axle skipping rotation. Further inspection showed the bearings completely gone on the outside cv joint next to wheel.
Unfortunately my local guys stopped rebuilding them so I called FG Procurement and had one in two days. 85.00 + 16.00 shipping. Kit comes with boot, outer cv joint, boot clamps, keeper ring, tube of grease and bearings already installed. Pulling the axle was straight forward. Remove everything behind the tire and the axle will be looking right at you. You will need a big impact to remove axle nut(22mm?). No need to remove strut. Work around it. Grab the axle and make a sharp pull towards you and it will snap out of front pumpkin. The biggest problem was getting that little gear off the end of the axle. After trying to beat it off(it has a keeper ring inside it) I got a 2" cut off wheel and made two cuts one on each side of the gear and tapped on it till it fell apart. Installing new outer cv joint onto axle was fairly easy and helped a lot having two people. You have to work that little keeper ring into place with a little flat blade screw driver while someone taps on end of axle to get it to slide down into place. Installing the axle back into pumpkin be careful not to hit seal. Most of the time it will be ok and continue to seal if you dont hit it.
Its pretty easy. This truck was a daihatsu s110p and the cv joint will have 71LAC on the bigger end of the cv joint itself. Some other s110p's will take the 75LAC. For what ever reason daihatsu used two different ones. So look for the numbers before you order one. ]]> Tips and Tricks TRAX and HORNS http://www.minitrucktalk.com/showthread.php?14004-Outer-cv-joint-replacement Question about transmission / transfer case http://www.minitrucktalk.com/showthread.php?14003-Question-about-transmission-transfer-case&goto=newpost Thu, 03 May 2012 22:08:18 GMT I have a 1993 Hijet pickup with 4WD. I bought it Gov. surplus and have just started to work on it. It seems to run fine but it's slow withpout the high range working. I did a search and read the posts about removing the c clip to allow the trans to go into high range. I have 2 questions; I removed the cover on the trans but can't seem to see the clip to be removed. Also there is a gear, w/shifting fork, "in the way" and I'm not sure what it does. It's vacuum operated with a unit on the back of the transfer case. It doesn't look like it has worked for a long time. The truck came from St Louis and it's pretty rusty. I have a repair manual but it doesn't cover the transmission.

Also, I noticed in one of the posts that they removed the back of the transfer case to remove the clip. I could do that but wanted to be sure nothing would fall out that I couldn't get back together without pulling the trans. Aqnd of course I don't have a new gasket.

Thanks for any help you could offer ]]> Daihatsu Hi jet ozark http://www.minitrucktalk.com/showthread.php?14003-Question-about-transmission-transfer-case 1995 Hijet Panel Van Brake Problem http://www.minitrucktalk.com/showthread.php?14002-1995-Hijet-Panel-Van-Brake-Problem&goto=newpost Thu, 03 May 2012 21:07:58 GMT 1995 HiJet 2wd. Brake booster doesn't seem to function properly. I have to press hard to get it to stop. It will sling you into the windshield but you have to really stand on the brakes. Sometimes when braking lightly it feels like the booster is starting to work, the pedal drops with less effort and it stops harder. This happens intermittently. I have properly bled the brakes starting at passenger rear then pass front(No bleeder on the drivers rear it has line to pass rear where bleeder should be) then the drivers front. The pads are good and it has firm pedal feel. I removed the vacuum line and it sucks well all the way to the booster.

Are there any adjustments that can be made? Thanks in advance

Dan ]]> Daihatsu Hi jet glider http://www.minitrucktalk.com/showthread.php?14002-1995-Hijet-Panel-Van-Brake-Problem New Mississippi Owner http://www.minitrucktalk.com/showthread.php?14001-New-Mississippi-Owner&goto=newpost Thu, 03 May 2012 16:32:28 GMT Hi Everyone, I researched and browsed this site before buying my mini truck. Well I found one on Craiglists, took it for a test drive, and... Hi Everyone,

I researched and browsed this site before buying my mini truck. Well I found one on Craiglists, took it for a test drive, and loved it. It is a 1996 Daihatsu Hijet. It runs great, it didnt get the 40-50 mpg that is stated on many sites though. I did more research on this site and found that some of the mpg claims are false. I get 34.5 mpg at 45 mph, 32.5 at 55 mph, and 29.5 at 65 mph. Since I live in Mississippi, there are no limitations on these trucks here. I drive mine on the interstate going back and forth from work. I have a license plate, inspection sticker, and insurance on it like any other car. I love the looks I get when I drive my truck, I like being unique and different, plus SAVE on gas! Im thinking about a paint job, what do you all think?



2012-04-14 16.22.50.jpg
Attached Images
]]> Introductions superbabineaux http://www.minitrucktalk.com/showthread.php?14001-New-Mississippi-Owner spark plugs? http://www.minitrucktalk.com/showthread.php?13992-spark-plugs&goto=newpost Thu, 03 May 2012 01:51:03 GMT Does anyone have a good number for spark plug replacement for a 99 Daihatsu S210? Does anyone have a good number for spark plug replacement for a 99 Daihatsu S210? ]]> Daihatsu Hi jet Scooter http://www.minitrucktalk.com/showthread.php?13992-spark-plugs Carb help http://www.minitrucktalk.com/showthread.php?13991-Carb-help&goto=newpost Wed, 02 May 2012 12:36:11 GMT Hello everyone. I have posted a couple of these pictures on here a few months ago but didnt seem to get much of a response so I thought i would try... Hello everyone. I have posted a couple of these pictures on here a few months ago but didnt seem to get much of a response so I thought i would try again and see if someone can help me out. I'm having trouble with my 95 mits starting when warm. Starts fine cold. I am hoping it has something to do with this carb. After buying the service manual and trying to adjust the carb I am wondering if someone can tell me just what the gold colored screw is in the middle of the picture and on top of the carb? I am assuming is has to do with the amount of fuel or air being let in as the further I screw it in the less rpm's get. However in the manual and in searching the many carb threads I can't seem to find any info as to where it should be set, etc. The only info I find has to do with adjusting the two screws in the other picture. Them being the chocke adjustment and fast idle. Of which I have the fast idle screwed all the way in and it barely adjusts the idle so not sure if i have other issues with that too or not? Any info would be greatly appreciated. Thanks
Attached Images
]]> General Truck Info jwetovick http://www.minitrucktalk.com/showthread.php?13991-Carb-help new book on mini trucks http://www.minitrucktalk.com/showthread.php?13990-new-book-on-mini-trucks&goto=newpost Wed, 02 May 2012 00:29:27 GMT my book i advertised stories for some weeks ago is almost complete it is a gem of a book all photos are in vivid color the following topics... my book i advertised stories for some weeks ago is almost complete it is a gem of a book
all photos are in vivid color the following topics are covered in depth, history, purpose, specs, comparisons, equipment, parts, acces., electrical conv. EV, amphibious builds, etc,, now i'd like you guys to sumbit photos,,, ones with nice backgrounds, such as a older neighborhood or farm or wooded scene the best one will go on the cover and the rest in the book where needed, if you don't have a photo to send go out with your truck and make one,,, to have the cover is going to be something you can be proud of this book is going to the publisher in about 2 weeks just after my proof readers are done, Rick @ bestused tractor has already been a great help and his story and business is all over the book don't miss this opertunity the photos that are used will be named in the back and the cover shot used will be mentioned up front in the credits email to midwayminis@gmail.com mark roehrig author of "the amphigeo story"
man quest to build an amphibious car! 321 213 3002 if you'd like to call to get more info on the photos i'm looking for its a front cover so a real pituresque photo is needed thanks ahead of time
ps incl your address to receive a free copy if we use your photo ]]> General Truck Info wheelsea http://www.minitrucktalk.com/showthread.php?13990-new-book-on-mini-trucks My Project this weekend-Dupli-color bed coating http://www.minitrucktalk.com/showthread.php?13989-My-Project-this-weekend-Dupli-color-bed-coating&goto=newpost Mon, 30 Apr 2012 15:34:56 GMT I wanted to lineX my truck bed, but after finding out what it cost, I decided to give dupli-color rattle can a go. It was on sale for 7 bucks a can... I wanted to lineX my truck bed, but after finding out what it cost, I decided to give dupli-color
rattle can a go. It was on sale for 7 bucks a can at PepBoys, plus another 10% for military discount.
Overall it turned out great, as with any paint job, its all about prep work. I used the 80 grit
harbour frieght sanding blocks. I used thease all the time, there cheap and do the job well.
Next I wiped everything down with denatured alcohol. Then masked everything off.
I did the interior as well. I have a few spots that wrinkled. After a few days I'll
see what they look like, then hit them with some sandpaper and reshoot. Also on the bed
there is some powder type overspray that makes it look darker than other areas, I'll give a
few days then hit that with either the water hose or some light sanding.
All together I used 11 cans.
heres some pics...

At the time the pics were taking, It was still wet. I'll take some more today with bed rails up and
toolbox installed.
Attached Images
]]> Suzuki Carry davecaris http://www.minitrucktalk.com/showthread.php?13989-My-Project-this-weekend-Dupli-color-bed-coating if you like blues/funk guitar..check this http://www.minitrucktalk.com/showthread.php?13988-if-you-like-blues-funk-guitar-check-this&goto=newpost Mon, 30 Apr 2012 04:08:01 GMT love this guys technique..very nice
http://www.youtube.com/watch?v=HpmzW...feature=relmfu ]]> Mini Lounge fupabox http://www.minitrucktalk.com/showthread.php?13988-if-you-like-blues-funk-guitar-check-this 2000 Mitsubishi Van 4x4 High/Low Air Condition http://www.minitrucktalk.com/showthread.php?13987-2000-Mitsubishi-Van-4x4-High-Low-Air-Condition&goto=newpost Sun, 29 Apr 2012 22:24:56 GMT Here's a super clean van. EFI. High/Low with ac.
84000 kms. Only pick on this van is a small dent, left rear half way up pillar next to hatch. Should be able to see it in picture. I will deliver it anywhere in Texas for 1.00 a loaded mile. 7600.00
Terry Bearden
dba TB Tractors/Trax and Horns Mini Trks.
Austin,Tx
512-217-7456
Attached Thumbnails
Click image for larger version.  Name: mits1.jpg  Views: N/A  Size: 63.0 KB  ID: 10070   Click image for larger version.  Name: mits08.jpg  Views: N/A  Size: 62.4 KB  ID: 10071   Click image for larger version.  Name: mits09.jpg  Views: N/A  Size: 55.9 KB  ID: 10072   Click image for larger version.  Name: mits10.jpg  Views: N/A  Size: 65.7 KB  ID: 10073   Click image for larger version.  Name: mits 07.jpg  Views: N/A  Size: 62.3 KB  ID: 10074  

]]> Mini Truck Sales TRAX and HORNS http://www.minitrucktalk.com/showthread.php?13987-2000-Mitsubishi-Van-4x4-High-Low-Air-Condition Quick Links http://www.minitrucktalk.com/showthread.php?13986-Quick-Links&goto=newpost Sun, 29 Apr 2012 22:08:24 GMT If I click on quick links nothing happens. Everything else on that line is working ????????? If I click on quick links nothing happens. Everything else on that line is working ????????? ]]> Mini Lounge TRAX and HORNS http://www.minitrucktalk.com/showthread.php?13986-Quick-Links maybe... maybe not..? http://www.minitrucktalk.com/showthread.php?13985-maybe-maybe-not&goto=newpost Sun, 29 Apr 2012 19:41:50 GMT i have a 1995 mini cab. this is the problem: when i start the truck it seems to sound good. but if i let it idle and not jump in it and go it acts... i have a 1995 mini cab. this is the problem: when i start the truck it seems to sound good. but if i let it idle and not jump in it and go it acts like it floods its self out and dies. then it wont start again unless i wait like an hour then it takes right off again. once i get it warmed up it seems to run great. also i noticed that if i wash it it doesn't want to start up very good or at all. i love the truck sometimes this problem can be really aggravating especially when i get up in the a.m. to head out for a hunt and it don't want to go.:frustration: please help i know if i don't get this fixed im going to end up wearing the starter out.:confused: thanks for any help ]]> Mitsubishi Minicab 1995 mini cab http://www.minitrucktalk.com/showthread.php?13985-maybe-maybe-not honda acty 5 speed gearbox problems help !!! http://www.minitrucktalk.com/showthread.php?13984-honda-acty-5-speed-gearbox-problems-help-!!!&goto=newpost Sun, 29 Apr 2012 19:31:37 GMT hello guys i have a 4 speed acty 1981, and i have bought a 5 speed gearbox from a 1986 car. i want to take the gearbox apart but i only have the... hello guys

i have a 4 speed acty 1981, and i have bought a 5 speed gearbox from a 1986 car.
i want to take the gearbox apart but i only have the 4 speed shop manual.

i have tried to dissemble the gearbox housing but it doesn't work withoud the right manual

can anybody help me with this?

thanks in advance

ronny ]]> Honda Acty honda-ronny http://www.minitrucktalk.com/showthread.php?13984-honda-acty-5-speed-gearbox-problems-help-!!! work in progress http://www.minitrucktalk.com/showthread.php?13983-work-in-progress&goto=newpost Sun, 29 Apr 2012 16:34:32 GMT Attachment 10067 (http://www.minitrucktalk.com/attachment.php?attachmentid=10067)Attachment 10068... looking good 001.JPGlooking good 002.JPGlooking good 003.JPG new tool box cab lights and led headlights
Attached Images
]]> Mitsubishi Minicab kioti2008 http://www.minitrucktalk.com/showthread.php?13983-work-in-progress