hey guys im getting ready to put some new boots on my front driveshafts the outer ones next to the wheel, i dont have any books that tells me and so i would like some help im just an fairly good weekend mech. i have a 1993 miti mmc that i drive on the roads every day to take my daughter to school. i get 36 mile per gall driving 45 to 5o i have 13 inch tires 155-70 i have driven around 3000 miles since i bought it last fall hopeing to hear from you guys , thanks max
CV Boots Welcome Max, i have not (yet) had to replace my boots. maybe this will give you a start. good luck........later, slim
CV Boots (2) Max, i just looked at the attachments and they don't look very readable. due to the limitations of the size of jpg's that can be attached to a post i can't seem to get them right. if you need a more viewable set of pages PM me and i will rescan at a better resolution and email to you.......later, slim and by the way these are out of a mits service manual.
Click on "page" on the tool bar. Click "zoom" click 150 or even 200 and you can "read" it fine. tmikewww
hey thanks for the info...all the pictures i have seen on the front diff shows a axle tube on the right side, is this how your trucks are in the US? mine has CV shafts on both side and the diff is mounted to the frame. info for anyone looking at these pages, to see better just copy and paste into paint then you can see them great! wyatt
those shots from the manual are for the americanized mitsubishi 4x4 lefty's that were sold in the US, late 80's up to 1995... u15 series 550's "Mighty Mits"