Search:

Nice Sambar...welcome to the forum :)

Looking good... :)

cool truck...has it's own bedroom too :) nice clean garage

http://minkara.carview.co.jp/en/userid/1718214/car/1273609/2155390/note.aspx

turn on google translate

Looks sweet :)

I've ordered a bunch of stuff from Don...he knows his stuff and is extremely helpful...found me a rare rear diff. for my Mira when it grenaded on the highway on me...very fast shipping.

great job...looks pretty heavy duty :)

Splauchs sorry,haven't been too active on the forum lately..just so frigging busy..if I remember correctly your truck is a left hand drive truck originally sold in the USA,not a Japanese impoted...

Welcome to the nuthouse :) post some pics when you can..we love photos.

stick a straight pin in the end ,that will usually clear it ..andis alsothe best way to move the swivel ball to aim the spray pattern

cool... can't wait to see the end result :pop:

lol "stroke the badger" I like that

928mr2
You need to take care of the air/vacuum leak before trying anything else or you will just be chasing your tail..idle on your truck is controlled by the ecu through input from the throttle...

there should only be voltage with the key on...the solenoid cuts fuel supply with the key off to prevent dieseling/flooding...if you unhook the exhaust at the downpipe (2 spring loaded bolts at the...

good advice....I always use cnet since you can trust the downloads are safe. I've never experienced the issue you are having,but I just type and post..rarely save anything since I'd instantly forget...

cool truck...welcome to the fun zone :)

The choke return spring not staying attached will definitely effect the idle...and if it pops off after full throttle the choke flap won't close properly...the shaft being loose could also cause a...

Anyone having problems with their wipers inside the cab ? My outside wipers work fine...the ones that do the windshield from the inside just seem to smear everything ,even though the bade is new. ...

I would say $200-300 for a complete used rear end.. You prob won't be able to get just the third member separately, but you never know

ouch ..that sucks.. I'm sure someone has a rearend for a good $

Welcome to the funhouse...the rear drive shafts are pressed into the centre diff. you need a puller or slidehammer to pop them out after the bearing retainers are unbolted on the outer ends of the...

Anytime...I am jammed with work recently and only have a second or 2 to peek in on the forum now and then... you'll pass on everything you learn ..by the time you get it running you'll have info for...

bidding.....:)

the choke flap should open with throttle position...as you manually push the throttle on the carb you should see the linkage arm that allows the choke plate to open as the throttle opens..if the...

Have you checked the coolant passages in the carb..2 small hoses (1 in and 1 out) the tubes are small diameter and if the coolant doesn't flow through them properly the choke will not operate...