I've tried to get it out of '95 but can't seem to get the combination right without taking the whole dash out. Any tips? I want'ed to put in an AM/FM car radio because the original doesn't work. Thanks
95? What type of radio is it? What model of vehicle is it? Do you know if it's stock? Heck, don't matter. Should be a plastic shroud around the radio. Usually popped off easily using a screwdriver. Sometimes you have to remove the ashtray (if equipped) to access another screw. After popping off the shroud, you should be able to access any retaining bolts to the radio casing, usually 2 bolts per side. Might be one underneath in the ashtray if it's directly under the radio. Once the bolts are loose, you should be able to slide it out - depending on the length of the antennae wire and power plug. That's the basics, but without further information, your application might differ.......
radio Thanks for the reply, Its a 95 ACTY with a stock radio with a single stem. The face plate doesn't want to pop off. Taking off the ashtray only lets you get the whole dash off.
Sorry I can't be more help. In the past, I've used a few websites by googling "car stereo removal" and found info on probably a dozen or so makes, but I tried with the Acty and can't find anything. Are there any little slots on either side of the faceplate? Some radio models have release pins that can only be accessed by a 'key' inserted into slots on both sides.
I got it out, there are two screws securing the radio bracket that you get to by removing the ashtray and standing on your head. Now I need a radio.
let us know what you get -- my 93 came without a radio... I was going to send you a picture of the space so you could see the bracket, but you already got it out...
Ho did that radio go I know I had a real issue to get mine out since it was old two rotary dial model I had to cut out part of the facia and re-modify ventilation system to fit a new one in It all looks pretty now I should probably update a new picture in my album to reflect how polished its all looking
On my model year the original Honda radio (of course with Pixel faults, but still working) comes out by removing the ashtray and then you see the screws which hold the bracket of the radio. OldMachinist installed an aftermarket radio, pics here http://www.minitrucktalk.com/showthread.php?4139-ACTY-Radio-Install So if you want to install an aftermarket radio, use the old bracket or bend something to fit. Here is a pic of a Honda Vamos Radio where a bracket is shown http://shop.ukeroo.com/products/detail.php?product_id=46980
I had to pull a/c plume off first, to be able to get screwdriver up into those screws in the back base of radio, just behind (above) ashtray. I didn't have to stand on my head , but would have had to find those !! screws.
My 1992 van came with an aftermarket deck in it. The stereo is precariously-placed in the hole, so it makes it easy to remove. It had a weird-looking tape deck in it, but upon closer inspection, it wasn't a tape deck, but rather a MiniDisc player!
had to get my one out again, volume knob plays cracy, knob is shaking and when I hit a bump it goes either cpl. loud or the other way. My one is installed and can be removed exactly as Bert Stevens described it and shows the pics in his post dated Nov 3, 2017. I even did not have to use a screwdriver up into those 2 screws in the back base of radio, just behind (above) ashtray. The screws were not tightened the last time, so if I push the radio from the backside, it comes out w/o any problem.The 2 screws slide into 2 guides on top of the ashtray holder.. That is in my 1997 HA3, Honda Auto Reverse Stereo Casette Recorder, and the sticker on the radio says Model PH-9698H, 12V - Ground, No. 0219896, Made in the Philippines. Trying to get the same one, found only one on Japan Yahoo auction. Scrapyard nearby also does not have same model, only newer ones, they told me that they scrap cars which are built before 2000 completely and do not remove any parts, too old for them to sell., so the cpl. cars go into the press/recycling.
Today I received the same style radio I got in the Japanese Yahoo auctions, Model PH-9698H, $20 plus shipping in total less than $30. Just installed it, first time I own the truck I can see the display in my new radio, the old one had pixel probs, sound is much better than the old one, and even the cassette recorder works. That gives me more options, there are plenty of Car Cassette Adapters available. Copied: Cassette adapters allow you to enjoy music from your contemporary mobile devices from either a vehicle or home stereo system which does not have the ability to play these devices. Older model vehicles and stereo systems usually have cassette decks. The cassette adapter will let you connect your iPods, iPhones, MP3/PMP/CD players and android phones to your car or home stereo in a simple and cost efficient way. Cassette adapters look exactly like a regular cassette tape, but that is where the similarity ends. Inside the car cassette adapter, there are magnetic inductors and gears which work to allow the adapter to pass as a real cassette, while it performs its true function: To play audio from your mobile device. Once inserted, your cars cassette deck thinks that a cassette is in place and will begin to play whatever is on your iPod, CD player or MP3 player and transmit that audio through your cars stereo system.
You really need to crawl under to find the screws. I couldn't see them at first, pulled most of the dash out, and still couldn't see them. They are way up there and you really have to stick your head under to see them. Good luck, once you find them, its easy.
Take the old radio out and measure the dimensions available, I scrapped my old broken radios and the Acty I no longer have to check for you
Generally, just about any of the new “mechless”, as in they don’t have tape or CD players, units will work. When I did the new radio in my Hijet, the mechless unit was actually smaller than the stock AM radio. I found some very good deals on units that are couple of model releases and years out of date for good prices on Amazon.
I think I saw somebody installed 4" speakers. Is that as large as the doors can accept without cutting?
here what I'm using. don't know about space in doors, used same size has is there, I think there 5" , place two others over my head , back window. https://www.amazon.com/gp/product/B07QNKYD2C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Yes. You also need to be careful with speaker depth, as the window rolls down behind the speaker. Here's the single DIN I'm using, Bluetooth actually works really well. The unit is a tad too blue at night, but overall it works great. https://www.amazon.com/Character-Re...JGXVBK,B08YF3JWHV,B08YD3X2L7&srpt=AV_RECEIVER
Relatively easy task. 1995 Honda ACTY TOWN with air conditioning. This is how I did it. Removed ashtray, shelf compartment under the glove compartment, cover for the A/C cold air supply duct. In that order. Next, removed the duct. Used a small mirror to find radio attachments, access 2 screws attached to the bottom of the OEM Honda (Clarion) radio. You just need to lossen these. The radio should slide out enough to remove antenna lead, and wiring harness. Then a trip to the auto parts store to get a matching plug. Had to test wiring for correct, un-switched power, switched power and ground (colors were correct for ACTY). The speakers and (power antenna) amp power were correct (taped off, not used). Test operation. Made permanent connections and heat shrinked. Put everything back in reverse order. New radio from Walmart $25 Dual radio works as advertised. 18 FM presets, 12 AM presets, Bluetooth (music, phone) AUX, and USB (MP3) inputs. Last function/mode, last state, on or off, when key is switched off, is restored when key switched on.