Click to view all our sponsors
Page 1 of 2 12 LastLast
Results 1 to 15 of 29

Thread: Running Rough

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Location
    Swift Current SK, Canada
    Posts
    15
    Rep Power
    0

    Default Running Rough

    My '90 Mits mini has been running rough all summer, the common problem of running rich. Checked choke linkage, tried Sea Foam, still no results. Now when it is cold it starts decent and runs good until it warms up, then it stalls and is hard to restart. Any help would be great.

  2. #2
    Join Date
    May 2009
    Posts
    113
    Rep Power
    5

    Default

    I am guessing carb problems, choke not coming off when warmed up, vaccumm line leaks? Rotor, cap? Carb needs to be rebuilt?

    Mine starts funny sometimes also I am thinking carb needs a rebuild, I might try plug wires first, have just about replaced all the vaccuum lines.
    Last edited by 92 Super Deluxe; 10-28-2009 at 03:00 PM.

  3. #3
    Join Date
    Jan 2008
    Location
    Swift Current SK, Canada
    Posts
    15
    Rep Power
    0

    Default

    I thought that the choke was pulled off by the coolant temp going up. Is the linkage operated by vacume

  4. #4
    Join Date
    May 2009
    Posts
    113
    Rep Power
    5

    Default

    I am unsure guessing so.

    Start it up cold with the aircleaner off in a fairly dust free place. You may need a mirrior and a light to see the choke go from closed to open. Unsure about the mitzis.


  5. #5
    Join Date
    Nov 2007
    Location
    Florida Panhandle
    Posts
    345
    Rep Power
    6

    Default Choke

    Quote Originally Posted by rancher3! View Post
    I thought that the choke was pulled off by the coolant temp going up. Is the linkage operated by vacume
    rancher3!,

    Yes/No. Check out the following threads:

    http://www.minitrucktalk.com/showthread.php?t=3739

    http://www.minitrucktalk.com/showthread.php?t=3682

    Hope this helps.......later, slim

  6. #6
    Join Date
    Jan 2008
    Location
    Swift Current SK, Canada
    Posts
    15
    Rep Power
    0

    Default

    Thanks for the info i will check it out. Great stuff on thoses links. I have been trying to post a picture of the truck but can't get it to up load any tricks?

  7. #7
    Join Date
    Nov 2007
    Location
    Florida Panhandle
    Posts
    345
    Rep Power
    6

    Default Photo upload

    Quote Originally Posted by rancher3! View Post
    Thanks for the info i will check it out. Great stuff on thoses links. I have been trying to post a picture of the truck but can't get it to up load any tricks?
    rancher3!,

    Our Fearless Leader (Kevin) was gracious enough to hook us up with a photo upload option:

    http://www.minitrucktalk.com/showthread.php?t=3474

    Looking forward to photos...........later, slim

  8. #8
    Join Date
    May 2007
    Location
    Gilbert, Arizona
    Posts
    602
    Rep Power
    10

    Default

    There are quite of things wrong with this version of vb. I've already ordered the newest vbulletin version 4 and when its release, we will be upgrading.

    As far as the uploading option, you could use www.imagelinky.com then post the forum link that it gives you.

    I've tested the upload option with many browsers and have no issues.
    -Kevin O'Neil

  9. #9
    Join Date
    Jan 2008
    Location
    Swift Current SK, Canada
    Posts
    15
    Rep Power
    0

    Default

    Well here goes i hope it works! Really enjoy the forum and the mini truck but it sure is frustrating when it won't run.

  10. #10
    Join Date
    Jun 2009
    Location
    north of Toronto
    Posts
    3,784
    Rep Power
    7

    Default

    Nice truck...do you use those tires on the street ? how much bump steer are you getting with them,if any
    “The man who does not read has no advantage over the man who cannot read.”
    ― Mark Twain

  11. #11
    Join Date
    Jan 2008
    Location
    Swift Current SK, Canada
    Posts
    15
    Rep Power
    0

    Default

    The truck is used off-road only. It will see gravel roads and the handling is not quite what it was with the 12's but is not that bad.

  12. #12
    Join Date
    Nov 2007
    Location
    Florida Panhandle
    Posts
    345
    Rep Power
    6

    Default

    That is a Good looking truck. I like the ROPS over the cab, been contemplating one for mine. Just got to figure out how to tie it back into the frame so as not to interfere with the dump bed and stick out too far on the sides.

    By the way, how did you get all that Florida beach sand in your yard way up there in SK? -------Wait a minute, I bet that's probably that "cold stuff" Hope you get your truck running......later, slim

  13. #13
    Join Date
    Mar 2008
    Location
    winnipeg manitoba canada
    Posts
    746
    Rep Power
    6

    Default

    go to your local auto junk yard buy a 2 wire coil and give it a try. (you can use one off all cars and trucks that is a 2 wire)
    Please Check out my Youtube Page. subscribers are always welcome
    youtube.com/starpuss

  14. #14
    Join Date
    Nov 2007
    Location
    Florida Panhandle
    Posts
    345
    Rep Power
    6

    Default coil

    I agree with Starpuss, it does sound like you have a weak/failing coil. Here's a link to a similar prob that Starpuss recommended a coil fix that worked:

    http://www.minitrucktalk.com/showthread.php?t=5773

    later, slim

  15. #15
    Join Date
    Jan 2008
    Location
    Swift Current SK, Canada
    Posts
    15
    Rep Power
    0

    Default

    I read the link, describes my truck to a T, last night i took it out and worked it real hard, moving cows through creeks, bogs and hills. It worked the best it has for a long time after it was warmed right up. Will try coil this weekend hope it works! Thanks for all the help.

Similar Threads

  1. Rough start
    By michael a in forum General Truck Info
    Replies: 13
    Last Post: 06-05-2011, 06:05 PM
  2. K6A Rough Idle Down Fix
    By Rickster in forum Suzuki Carry
    Replies: 3
    Last Post: 01-17-2009, 02:26 PM
  3. Rough start up?...
    By Spdracr in forum Subaru Sambar
    Replies: 14
    Last Post: 02-02-2008, 09:48 AM
  4. runs rough
    By badfuffy in forum Introductions
    Replies: 4
    Last Post: 01-06-2008, 07:26 PM
  5. Rough idle
    By pepci in forum General Truck Info
    Replies: 10
    Last Post: 11-16-2007, 08:42 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •