1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

'96 automatic Bravo/Minicab vacuum delay valves?

Discussion in 'Mitsubishi Minicab' started by EllieBee, Mar 15, 2024.

  1. EllieBee

    EllieBee New Member

    Does anyone know where to get vacuum delay valves that works for a '96 automatic Bravo? I need the one that goes in the vacuum line that runs to the throttle positioner. Unfortunately, I don't have the original part anymore so I can't just walk into an auto parts store and compare what they have. Attached in a photo which contains the valve that runs to the auto choke; the valve I needed is near-identical and the same colors, however I remember the one I need being slightly larger, about 1-1.5 inches in diameter. Does anybody know where to source a compatible one? PXL_20240302_232741800~3.jpg
     
  2. MikeD

    MikeD Member

    I've seen this on the parts diagram before. I thought it was a fuel tank vent.
    >> you mentioned an auto choke, isn't that a carb thing? Don't the 96 models have fuel injection?

    Have you tried to put your VIN into partsouq.com? I bet you can find it. I can help if you'd like.
     
  3. MikeD

    MikeD Member

    Maybe this???


    upload_2024-3-20_14-2-5.png upload_2024-3-20_14-2-14.png
     
  4. MikeD

    MikeD Member

Share This Page