i have bleed it every way you can.....i can take the rear line off when it is running and nothing comes out....i can shut it off and coolant comes out through the choke start it and it stops.....any help would be great
Had a similar issue. Replaced all coolant hoses, cranked the engine and it would shoot up to around 4000 rpm and get hot since no coolant was making its way through the intake to the carb. Ended up draining the coolant again, fill the radiator until it spills, open the bleeder screws until air stops hissing , close them , and repeat until a steady stream of coolant comes out the bleeders. I had also removed the intake manifold and swore I screwed something up, but it was just my impatience for not thoroughly bleeding the system.Also try squeezing the main hoses and shaking the vehicle side to side for bleeding . Hope this helps.